Flash Brandcode B11 Fix Lcd Buram After Flash
Brandcode B11 BP237_Brandcode_V2.1_20161119
Model Name : t13_bc_237_64_8_dt
Model Brand : SPRD
Model Device: t13_bc_237_64_8
AndrVersion : 5.1
BaseBand CPU: T13_BC_237_64_8
Project Ver : 20161119
Model Ext : B11
Brandcode V2.1 diflash pake V1.0, jadinya LCD jadi Burem lalu gelap, tapi muncul suara.
Bahan:
1. Download Firmware PAC Brandcode B11
- Firmware Brandcode B11 V2.1 atau Download disini
- Firmware Brandcode B11 V1.0 atau Download disini
- Firmware Brandcode B11 V2.0 atau download disini
- BUAT FIX BLUESCREEN PAKE INI DOWNLOAD B11 FIX BLUESCREEN
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini
Note :
1. BOOT Volume +
2. Samakan versi
3. kalo gak tau versi, mending uncek uboot, boot, logo, erase uboot
Cara Flash Brancode B11 via Research Download
Log Read Firmware Brandcode B11
Operation : Read FullFlash [ v1.25 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- >Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : t13_bc_237_64_8_dt
Model Brand : SPRD
Model Device: t13_bc_237_64_8
AndrVersion : 5.1
BaseBand CPU: T13_BC_237_64_8
Project Ver : 20161119
Model Ext : B11
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2329 MiB
Saved to : E:\andro 1\brandcode\b11\T13_BC_237_64_8_t13_bc_237_64_8_5.1_20161119_B11\
Done!
Comments
Post a Comment